Slide Penstock with Slide Rails

  • usable for installation at inlets and outlets of chambers and basins
  • suitable for throttling and regulating purposes
  • sealing on 4 faces
  • for on- and off-seating pressure
  • low operation forces
  • dimensions: available up to the largest measurements

We invite you to  or visit the
» Make an inquiry   » Shop of IBS Technics
  • welded frame out of rugged bended profile
  • wear-resistant slide rail screw fixed on the frame
  • profile seal maintenance friendly screw fixed on the frame
  • universal fixing of all actuation facilities possible.
  • crafted according to DIN 19569-4, BSI BS 7775 and ANSI / AWWA C513-05, AWWA C561-04
  • for bolting and sealing by cement mortar
  • for grouting into recess
  • straight sill for bolting / grouting
  • round sill for grouting

Design 304 / 304L

  • frame: M.-No.: 304 / 304L                            
  • plate: M.-No.: 304 / 304L
  • seal: M.-No.: NBR / EPDM
  • slide rails: M.-No.: POM
  • bolts, nuts: M.-No.: 304 / 304L
  • stem: M.-No.: 304 / 304L
  • stem nut: M.-No.: bronze Rg7
  • push rod: M.-No.: 304 / 304L
  • fixing material: M.-No.: 316Ti / 316L

 Other materials like Super Duplex Steel on request

  • on wall – bracket with square cap
  • with protruding headstock and hand wheel / gearbox / electric actuator / cylinder
  • with central headstock and hand wheel / gearbox / electric actuator / cylinder